Main specification
| Product | LED tube light | ||
| Input | AC200-240V/50-60Hz or AC100-277V /50-60Hz | ||
| Chip | SMD2835 | ||
| Lumen efficency | 100lm/W, 130lm/W, 160lm/W | ||
| CRI | 80 (can offer CRI>90 if wanted) | ||
| PF | 0.95 | ||
| THD | <15 | ||
| Driver | Non-isolated driver; Isolated driver (CE approved) | ||
| Dimmable | Triac,1-10V can choose | ||
| Working temp. | -40°C - 50°C | ||
| IP grade | IP40 | ||
Energy efficency class | A++ | ||
CCT | 3000K, 4000K, 5000K, 6000K (customized CCT available, precise to ±100K) | ||
| Certificates | CE, RoHS | ||
| Lifespan | 50000 hours | ||
| Warranty | 3 years, 5 years can choose | ||
T8 1200mm tube specification
Item NO. | AA-T8L12-18W (100lm/W) | AA-T8L12-18W (130lm/W) | AA-T8L12-18W (160lm/W) |
| Size | 1200mm | 1200mm | 1200mm |
| Watt | 18W | 18W | 18W |
| LEDs qty | 120pcs | 120pcs | 192pcs |
| CRI | 80 | 80 | 80 |
| Ouput lumen | 1800lm | 2340lm | 2880lm |
T8 1500mm tube specification
Item NO. | AA-T8L15-24W (100lm/W) | AA-T8L15-24W (130lm/W) | AA-T8L15-24W (160lm/W) |
| Size | 1500mm | 1500mm | 1500mm |
| Watt | 24W | 24W | 24W |
| LEDs qty | 152pcs | 152pcs | 216pcs |
| CRI | 80 | 80 | 80 |
| Ouput lumen | 2400lm | 3120lm | 3840lm |
Item NO. | AA-T8L9-14W (100lm/W) | AA-T8L9-14W (130lm/W) | AA-T8L9-14W (160lm/W) |
| Size | 900mm | 900mm | 900mm |
| Watt | 14W | 14W | 14W |
| LEDs qty | 90pcs | 90pcs | 112pcs |
| CRI | 80 | 80 | 80 |
| Ouput lumen | 1400lm | 1820lm | 2240lm |
Item NO. | AA-T8L6-9W (100lm/W) | AA-T8L6-9W (130lm/W) | AA-T8L6-9W (160lm/W) |
| Size | 600mm | 600mm | 900mm |
| Watt | 9W | 9W | 9W |
| LEDs qty | 60pcs | 60pcs | 92pcs |
| CRI | 80 | 80 | 80 |
| Ouput lumen | 900lm | 1170lm | 1440lm |
160lm/W IES luminous diagram
Operation Manual
Wiring With Magnetic Ballast&Starter
Ballast Compatibility:
Magnetic/inductive ballasts are compatible with LED Tubes, which are easy to replace.
Step 1. Turn off the power, and take out the old fluorescent tubes.
Step 2. Remove the old starter
Step 3. Install the LED Tube.
To save energy, we recommend you to remove the magnetic/inductive ballast (though compatible), and wire as below B1
Wiring with Electronic Ballast
Ballast Compatibility:
Electronic ballasts are not compatible with LED T8 tubes. Do NOT install the tube without removing/bypassing the electronic ballast as damage to the LED T8 tube may occur.
Step 1. Turn off the power, and take out the old fluorescent tubes.
Step 2. Remove/bypass the electronic ballast
Step 3. Wire as B1, and install the LED Tube directly.
If you do want to wire as follows‚, please advise us in advance we'll not shorten the end of the tube for you .Otherwise, we'll default to shorten the end of the tube and make the tube with the above A1&B1 wiring
In the view of security, we recommend above B1 wiring method.
Attention:
In order to working normally,Please confirm the using voltage is 85-265V;
1) Please follow correct installation way to install;
2) Please turn off the power supply when install or remove the tubes to avoid the electric shock;
3) Do not using in the place which is high humidity and full of dust in order to confirm the performance. (Bathroom,Bath house,polished workshop,etc);
4) Please install the lights to correct size of tube base;
5) Please confirm the problems causing below if it is not by wrong installation.
FAQ :
Why there are no lighting when connect the power supply.
Switch off the power supply,and check where or not the electric circuit is powering up. And tube pins has connected well with Power supply sheet metal
Why there are flicking when connect with the power supply
Please check whether or not the service voltage is lower nominal voltage;
If still can not solve it,please contact the qualified electronic technician or welcome to
contact us, thank you!
Packing info
| Tube size | 1200mm |
| Netweight(with Driver) | 0.3 KGS |
| Quantity/carton | 25 PCS |
| Carton Size(mm) | 1250*220*220 |
| Carton Weight | 14 KG |
| Tube size | 1500mm |
| Netweight(with Driver) | 0.4 KGS |
| Quantity/carton | 25 PCS |
| Carton Size(mm) | 1550*220*220 |
| Carton Weight | 18KG |
Packing diagram
Features:
• Super bright Epistar SMD2835 LEDs source, isolated CE certificated driver;
• No flicker, high light efficiency , all choose A quality level electronic parts and component parts;
• With good heat aluminum material, excellent thermal management and thermal performance;
• Constant current ,PF> 0.95, no flicker, no noise, input voltage AC90‐265V;
• Energy saving and low power consumption, saving up 40‐50% compared to traditional fluorescent lamp and 80% to traditional incandescent lamp;
• Color temperature 2800‐6500K;
• CE,RoHS certificated, long lifespan over 50000 hours.
Applications:
Widely used in Commercial purposes and Homeillumination, such as Conference&Meeting rooms,Residential, Buildings,Office,School,Library,Museum,Aisle,Shop window,Gambling house,Groggery,Department store,Booth...etc.
join us
邮箱验证*
*