• 1/5
Input AC100-277V / AC220-240V
LED chip Epistar SMD2835
CRI 80
PF 0.95
Flicker No
THD <15
Waterproof IP40
Working temp. -40-50°C
Consult Now
Parameters
Input
AC100-277V / AC220-240V
LED chip
Epistar SMD2835
CRI
80
PF
0.95
Flicker
No
THD
<15
Waterproof
IP40
Working temp.
-40-50°C
I know
FeaturesSpecificationAccessoryPacking

Features:

• Super bright Epistar SMD2835 LEDs source, isolated CE certificated driver;
• No flicker, high light efficiency , all choose A quality level electronic parts and component parts;
With good heat aluminum material, excellent thermal management and thermal performance;
• Constant current ,PF> 0.95, no flicker, no noise, input voltage AC90‐265V;
• Energy saving and low power consumption, saving up 40‐50% compared   to
Traditional fluorescent lamp and 80% to traditional incandescent lamp;
• Color temperature 2800‐6500K;
• CE,RoHS certificated, long lifespan over 50000 hours.


Applications:

Widely used in Commercial purposes and Homeillumination, such as Conference&Meeting rooms,Residential, Buildings,Office,School,Library,Museum,Aisle,Shop window,Gambling house,Groggery,Department store,Booth...etc.


Main specification


ProductLED tube light
InputAC200-240V/50-60Hz or AC100-277V /50-60Hz
ChipSMD2835
Lumen efficency100lm/W, 130lm/W, 160lm/W
CRI80 (can offer CRI>90 if wanted)
PF0.95
THD<15
DriverNon-isolated driver; Isolated driver (CE approved)
DimmableTriac,1-10V can choose
Working temp.-40°C - 50°C
IP gradeIP40

Energy efficency   class

A++

CCT

3000K, 4000K,   5000K, 6000K   
(customized CCT available, precise to ±100K)
CertificatesCE, RoHS
Lifespan50000 hours
Warranty3 years, 5 years can choose



Item specification

Item NO.

AA-T8L12-18W

(100lm/W)

AA-T8L12-18W
(130lm/W)
AA-T8L12-18W
(160lm/W)
Size1200mm1200mm1200mm
Watt18W18W18W
LEDs qty120pcs120pcs192pcs
CRI808080
Ouput lumen1800lm2340lm2880lm






160lm/W IES luminous diagram




Operation Manual


Wiring With Magnetic Ballast&Starter

Ballast Compatibility:


Magnetic/inductive ballasts are compatible with LED Tubes, which are easy to replace.

Step 1. Turn off the power, and take out the old fluorescent tubes.

Step 2. Remove the old starter

Step 3. Install the LED Tube.


To save energy, we recommend you to remove the magnetic/inductive ballast (though compatible), and wire as below B1

Wiring with Electronic Ballast



Ballast Compatibility:


Electronic ballasts are not compatible with LED T8 tubes. Do NOT install the tube without removing/bypassing the electronic ballast as damage to the LED T8 tube may occur.


Step 1. Turn off the power, and take out the old fluorescent tubes.

Step 2. Remove/bypass the electronic ballast

Step 3. Wire as B1, and install the LED Tube directly.


If you do want to wire as follows, please advise us in advance we'll not shorten the end of the tube for   you   .Otherwise, we'll   default to shorten the   end of   the   tube   and make   the   tube   with the above A1&B1 wiring



In the view of security, we recommend above B1 wiring method.



Attention:

In order to working normally,Please confirm the using voltage is 85-265V;

1) Please follow correct installation way to install;

2) Please turn off the power supply when install or remove the tubes to avoid the electric shock;

3) Do not using in the place which is high humidity and full of dust in order to confirm the performance. (Bathroom,Bath house,polished workshop,etc);

4) Please install the lights to correct size of tube base;

5) Please confirm the problems causing below if it is not by wrong installation.



FAQ :

  • Why there are no lighting when connect the power supply.         

Switch off the power supply,and check where or not the electric circuit is powering up. And tube pins has connected well with Power supply sheet metal           


  • Why there are flicking when connect with the power supply

Please check whether or not the service voltage is lower nominal voltage;

If still can not solve it,please contact the qualified electronic technician or welcome to

contact us, thank you!



Packing info

Tube size1200mm
Netweight(with Driver)0.3 KGS
Quantity/carton25 PCS
Carton Size(mm)1250*220*220
Carton Weight14 KG




Packing diagram