1) Super bright LED light source, high light efficiency >120lm/W, energy saving more than 80% and eco-friendly, smoothly light for our eyes;
2) Aluminum alloy frame with anti-static thermoplastic coating, corrosion resisting and antioxidant;
3) With ENEC, TUV, CE approved driver, PF> 0.95, flicker free;
4) Mitsubishi acrylic(PMMA) light guide plate, never turn yellow;
5) Special circuit layout and good heat dissipation, lifespan more than 50000 hours;
6) Beautiful appearance, elegant, lightweight, untra-thin;
7) Easy installations: Recessed , Mounted, Suspension, Imbedded installation are available.
LED panel light widely used in Commercial purposes,Conference&Meeting rooms, Residential Buildings, Home,Office , School, Library,Factory, Warehouse, Hotel, Casino, Hospital,Commercial Center, Supermarket, Shopping mall etc.
LED panel light
AC200-240V/50-60Hz or AC85-265V /50-60Hz
Epistar SMD4014 or SMD2835
>80 ( can offer CRI>90 if required)
Choose branded driver:
Meanwell, Philips, LIFUD, AGT, BOKE, etc (ENEC, TUV,CE approved)
Triac,1-10V,DALI, DMX512 can choose
-40°C - 50°C
Energy efficency class
3000K, 4000K, 5000K, 6000K (customized CCT available, precise to ±100K)
White, Silver, Black, etc
EMC (EN61547, EN55015, EN61000), LVD (EN60598), EN62471, RoHS
3 years, 5 years can choose
(Other customized sizes are available, please contact email@example.com for more details!)
Test Report: 40W IES
Luminous Decay Graph
1.Recessed installation (no need accessory for LED panel)
Picture 10: Turn LED panel 45 degree against the installation square space;
Picture 11 & 12: Upward the LED Panel for installation;
Picture 13 & 14: Turn LED Panel lighting face downword;
Picture 15: Finished installation;
1) For recessed installation, first check the size’s fitting for the
2) No accessory for recessed installation;
3) Be sure all “+” and “-“ are jointed correctly;
4) Be sure all screws and connects are firmly fixed.
Step 1: Attach hanging strings on led panel lights’ body
Picture 16: Take the hanging string;
Picture 17: Screw two nails to connect LED Panel with Hanging string;
Picture 18: Finished all hanging string, small size is four pieces, big size is six pieces;
Step 2: Attach hanging string to Ceiling
Picture 19: Open four φ5mm holes on the ceiling，and put holding parts inside, firmly fixed;
Picture 20: Screw the hanging ends inside;
Picture 21: Finish all screws and hanging the panel;
Picture 22: Connect LED Driver with state grid;
Picture 23： Finished installation and turn on power;
1) Be sure all “+” and “-“ are jointed correctly;
2) Be sure all screws and connects are firmly fixed.
3.Imbedded installation(spring clips)
|Step 1. Cut a hole on the ceiling and the cut-size need according to the actual size of the panel light.|
Step 2. Connect cable to panel light correctly ,then press the spring buckle vertical and put the panel into the hole slowly.
Step 3. Reconfirm the cut-size and the cable-connection, then put down the spring buckle and make sure the panel has been fixed stable.
4. Mounted installation
Step 1. Install the mounted steel to the ceiling first, make sure it hold tightly with ceiling, fix well each screws.
Step 2. Put the panel to the steel, make sure each side fix well, then screw it tightly.
Patent design mounted frame( smart design, quick and easy installation, 2 minutes can install one light!)
G.W per box
|20 GP container qty(pcs)|
40 GP container qty(pcs)
|40 HP container qty(pcs)|